Diameters: 2.85 mm
Tolerance: ± 0.05 mm (50 Microns) - (Typical~ 0.02 mm )
Recommended 3D printing temperature: 220 – 235 °C
Recommended 3D print speed: 30 – 60 mm/s
Recommended Heated bed: Heating not required
Build platform: PolyFlex™ requires no heating to the build plate, and it has good adhesion to most build plate surfaces (the “blue tape”, high temperature polyimide tape, etc.). It also features good interlayer adhesion and generates parts with excellent toughness
Storage: Store unused PolyFlex™ filament in the provided resealable bag with the desiccant pack to prevent moisture absorption
Note: PolyFlex™ can be printed together with PolyPlus™ PLA or PolyMax™ PLA on dual-extruder printers to generate objects with both soft and rigid parts
PolyFlex™ features a “Shore A” hardness of 90-95A and a large strain-to-failure of over 400%. These aren’t just figures on a page, but are tested values obtained from actual printed parts. What this means is that PolyFlex™ gives you cool flexible parts with no worry about the part breaking. PolyFlex™ is truly your best tool for creating fun flexible parts.
One of Polumakers main goals when developing PolyFlex™ was to make it easy for everyone to use. Flexible filaments are known to be difficult to work with. Well not any more. PolyFlex™ is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification. Not only does it print smoothly but adheres well to a large variety of surfaces with no need for a heated build plate leaving you to think about nothing other than what model your going to print.
The soft and flexible nature of PolyFlex™ opens up a new dimension of what one can do with desktop 3D printers, clothing, shoes, wearables, prosthetics…you name it. The possibilities are endless.