Average filament diameter: 1.75mm
Standard deviation of diameter: ± 0.05mm (~ 0.02mm typical)
Printing temperature range: 180 - 240 °C
Recommended printing temperature: 185 - 200 °C (with heated build platform) | 200 - 230 °C (without heated build platform)
Recommended heated build platform temperature: 60 - 70 °C
Recommended printing speed: 40 - 120 mm/s
Storage: Store unused PolyMax PLA filament in the provided resealable bag with the desiccant pack to prevent moisture absorption.
Regular PLA is a very brittle material, which greatly limits its range of applications. PolyMax PLA was designed to change this.
Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, PolyMax PLA is a sure winner when it comes to toughness. So if you are looking for a material that can withstand your mechanically demanding tasks, PolyMax PLA is up to the challenge.
The good mechanical strength of PolyMax PLA is achieved with no compromise in printing quality. As PolyMax™ PLA is also produced with Jam-Free™ technology you can be certain you will get high quality prints with excellent strength while still enjoying the ease of printing PLA.
Still printing ABS while trying to endure the odour and potential health risk? With PolyMax™ PLA you can get rid of that potentially hazardous ABS and still achieve the same structural strength with even more benefits such better printer compatibility, easier printing, less warping, no hazardous odours, and in many cases even better mechanical properties.